BATIYAY precision spring manufacturing
← ALL PRODUCTSPOWER SPRINGS

For Rotary Motion.
Controlled Energy.

Custom spiral power springs made from flat spring-steel strip for torque generation, energy storage and controlled rewind functions.

Request a Quote
OPERATING PRINCIPLE

The strip stores energy when wound and provides controlled torque when released

A power spring is connected between a central shaft and outer drum. As the shaft rotates, the spiral strip winds or unwinds elastically, storing energy for controlled reverse rotation and rewinding.

Strip thickness and width, active length, inner and outer diameters, and end connections are specified to achieve the target torque–angle characteristic and mechanism life.

01

Controlled torque

Project-specific torque and return response across the rotational range.

02

Kompakt enerji

High rotational energy storage within a compact envelope.

03

Custom end configuration

Inner and outer ends matched to the shaft, drum and mechanism attachment.

04

Tekrarlanabilirlik

Consistent geometry through controlled strip feeding and spiral winding.

BATIYAY precision spring manufacturing
POWER SPRING PARAMETERS

Geometry, end connections and torque–angle behavior are engineered together

  • Strip thickness (t)Primary dimension affecting torque capacity, stress and fatigue life
  • Strip width (b)Cross-section affecting transmitted load and installation envelope
  • Inner and outer diameters (Di / Do)Diameters defined by the center shaft, drum and available space
  • Active strip lengthStrip length determining working angle and available energy storage
  • Winding directionSelected to match the direction of movement and return
  • Inner and outer end attachmentsSpecialized geometries for reliable torque transfer between shaft and housing
BATIYAY precision spring manufacturing
MANUFACTURING

Controlled spiral forming from flat spring-steel strip

Spring-steel strip is fed through guide rollers and wound in the specified direction around a central mandrel. Inner and outer attachment ends are formed to project requirements; geometry is verified after required heat and surface treatments.

BATIYAY precision spring manufacturing
QUALITY CONTROL

Dimensional inspection and actual torque–angle verification

The power spring is held vertically while its outside diameter is measured using a caliper. For functional testing, the inner and outer ends are secured in appropriate fixtures on a torsion test machine; torque at specified angles and return behavior are verified.

APPLICATION AREAS

Mechanisms requiring energy storage and controlled rewind

Seat-belt retractorsCable and hose reelsOtomatik Geri Sarma SistemleriClock and timing mechanismsCover and shutter mechanismsIndustrial mechanisms
HAVE A POWER SPRING PROJECT?

Share your mechanism, attachment and torque requirements.

Please provide a drawing or sample together with assembly diameters, winding direction, working angle, target torque, cycle-life requirements and operating conditions.

Contact Us