BATIYAY precision spring manufacturing
← ALL PRODUCTSEXTENSION SPRINGS

From Connection to Motion.
Controlled Return.

Spring solutions producing tensile force between two attachment points, with initial tension, hook geometry and working extension tailored to the application.

Request a Quote
OPERATING PRINCIPLE

Force is present before the applied external load

In extension springs, body coils touch in the unloaded state. The initial tension introduced during manufacture must first be overcome before the coils begin to separate.

Design assessment therefore covers not only wire diameter and spring length but also initial tension, working extension, maximum operating length and the movement direction of attachment ends.

01

Initial tension

Initial tension is verified for the application before coils begin to separate.

02

Kanca geometrisi

German, English, extended or custom hook and loop configurations.

03

Hook orientation and angle

Angular relationship of both ends and their assembly orientation.

04

Working extension

Safe extension between minimum and maximum working lengths.

BATIYAY precision spring manufacturing
EXTENSION SPRING PARAMETERS

Coil body and attachment ends designed as an integrated component

  • Coil body lengthUnloaded length of the close-wound coil section
  • Toplam serbest boy (L₀)Length between attachment points including hooks
  • Initial tension force (F₀)Preload force required to separate the coils
  • Working loadsF₁, F₂ and other load points at specified extensions
  • Maximum operating lengthLimit preventing permanent set and hook damage
  • Hook angle and openingGeometry matched to mounting pin, load and direction of travel
BATIYAY precision spring manufacturing
MANUFACTURING

Close coiling and controlled end forming

Coils are wound closed to achieve the required initial tension. Hooks are formed from the continuation of the body wire; gap, angle and orientation are verified during in-process inspection.

BATIYAY precision spring manufacturing
FUNCTIONAL VERIFICATION

Tensile testing using both spring hooks

The spring is extended between fixtures representing its service orientation. Initial force, loads at specified working lengths and force-extension behavior are checked; hook strength and fatigue life are verified when required.

APPLICATION AREAS

Mechanisms requiring restoring force and tensile connection

Cover and latch mechanismsFren SistemleriAgricultural machineryAutomotive ComponentsReturn mechanismsIndustrial Equipment
HAVE AN EXTENSION SPRING PROJECT?

Share your attachment and operating requirements.

Provide the drawing, mounting points, hook orientation, free length, working lengths and load values.

Contact Us