BATIYAY precision spring manufacturing
← ALL PRODUCTSDISC SPRINGS

In Compact Spaces.
High Force Control.

Disc springs with conical geometry delivering high force over short axial travel, used individually or in series and parallel stacks.

Request a Quote
OPERATING PRINCIPLE

Conical geometry flattens in a controlled manner under axial load

A disc spring stores elastic energy as its conical height decreases under axial load. Within its permitted operating range it returns to its original geometry after unloading.

In addition to individual use, series stacking increases deflection, parallel stacking increases load capacity, and combined arrangements achieve project-specific force–deflection characteristics.

01

High load capacity

High load capacity in limited axial installation space.

02

Controlled deflection

Target load achieved at a defined operating height.

03

Paket dizilimi

Characteristics adjusted using series, parallel or combined stacks.

04

Compact design

Suitable for mechanisms with short working travel.

BATIYAY precision spring manufacturing
DISC SPRING PARAMETERS

Geometry and force–deflection behavior assessed together

  • Outer diameter (D)Diameter matched to installation space and outer guidance conditions
  • Inner diameter (d)Diameter matched to central shaft and inner guide clearance
  • Material thickness (t)Primary dimension affecting load capacity and stress levels
  • Free height (L₀)Unloaded overall height of the disc spring
  • Cone heightRaised conical geometry relative to the flat plane
  • Working deflection and loadAxial force to be verified at a specified deflection s
BATIYAY precision spring manufacturing
MANUFACTURING

Controlled conical forming after precision blanking

Appropriate spring steel is cut to shape and deburred. The cone is formed using controlled tooling. Dimensional and functional inspections follow heat treatment and surface finishing.

BATIYAY precision spring manufacturing
FUNCTIONAL VERIFICATION

Inspection under actual force–deflection conditions

The disc spring is axially compressed between suitable support and loading fixtures. Force is measured at the specified working height or deflection and compared with drawing tolerances.

APPLICATION AREAS

Systems requiring high axial force in compact spaces

Valves and actuatorsBolted jointsBrake and clutch systemsPress and tooling systemsBearing preloadingEnergy and heavy industry
HAVE A DISC SPRING PROJECT?

Share your load, deflection and installation requirements.

Provide the drawing with outer and inner diameters, thickness, free height, working deflection, target load and required stack arrangement.

Contact Us